| Individually wrapped beams can be installed without removing the wrapping. The wrapping should be slit or punctured on the under side to permit drainage of condensation, but may be left on until all interior painting and finishing is complete. If wrapping is removed at connection points, it can be replaced after the connection is complete. |
 |
 |
 |
| In addition to making curved beams, American Laminators can also manufacture beams with one side curved and the other side straight. This is done by either cutting a curve into one side of a straight beam or by making a straight cut on one side of a curved beam. The glue lines are usually exaggerated on the cut side. If both sides are to be exposed, request our nearly invisible glue or a coverboard. | |
 |
The curved beams to the right are part of an outdoor stage near Sedona, Arizona. The open wood structure blends well with the open environment. The beams get their dark color from the application of a preservative (applied by others). Preservative treatment is common in timbers exposed to moisture and helps to insure a long service life.
|
Copyright © 2005 American Laminators. All Rights Reserved.